Sensing mode
|
Through-beam
|
Retroreflective
(M.S.R.)
|
Diffuse-reflective
|
Model
|
Relay output
(AC/DC power)
|
PEA-T30A
|
PEA-M5A
|
PEA-R2A
|
NPN Open collector
output (DC power)
|
PEA-T30N
|
PEA-M5N
|
PEA-R2N
|
PNP Open collector
output (DC power)
|
PEA-T30P
|
PEA-M5P
|
PEA-R2P
|
Sensing distance
|
30 m
|
0.1 ~ 5 m
|
2 m
|
Hysteresis distance
|
-
|
20 % or less of detection distance
|
Detecting object
|
Ø12 mm more (Opaque)
|
Ø60 mm more (Opaque)
|
White paper (100 x 100 mm)
|
Light source (wavelength)
|
Infrared light emitting
diode (855 nm)
|
Red light emitting diode
(660 nm)
|
Infrared light emitting diode
(855 nm)
|
Power
voltage
|
Relay output
(AC/DC power)
|
24 - 240 V a.c. ±10 % or 24 - 240 V d.c. ±10 % (Ripple max. 10 %)
|
Open collector
output (DC power)
|
12 - 24 V d.c. Class 2 ± 10 % (Ripple max. 10 %)
|
power
consumption
|
Relay output
(AC/DC power)
|
▪Transmitter Max. 1 VA,
▪Receiver Max. 2VA
|
Max. 3 VA
|
Open collector
output(DC power)
|
▪Transmitter Max. 15 mA
▪Receiver Max. 20 mA
|
Max. 30 mA
|
Contro
output
|
Relay output
(AC/DC power)
|
▪relay contact output (Contact configuration 1a1b)
▪Electrical life : Min 10 cycles
▪Contact Capacity : 30 V d.c. 5A / 250 V a.c. 5 A with resistive load
▪Mechanical life : Min. 50 million cycles (Opening/closing frequency 180 times/min)
|
Open collector
output(DC power)
|
▪NPN or PNP open collector output
▪Load current - Max. 100 mA (26.4 V d.c. standard)
▪Residual voltage - Max. 1.5 V
|
Operation mode
|
Light ON / Dark ON button switch type
|
Indicator light
|
▪Control output indicator light : Orange LED
▪Stability indicator light : Green LED
(However, the Green LED of the through-type emitter is a power indicator)
|
Auto
teaching
|
Through-beam
|
If the B2 button is pressed for more than 3 seconds in the presence
of a detection object, the sensitivity is automatically set.
|
Retroreflective
(M.S.R.)
|
Diffuse- reflective
|
1) In the presence of a detection object (stable light incident)
2) Release the B2 button after pressing it for more than 3 seconds.
3) Check the Green + Orange LED cross blinking (try again if either side is not
blinking)
4) Press the B2 button once after removing the detected object (0.5 seconds)
|
AGC
|
When the unstable light enters for 20 sec or more in button locked state, automatically changes to the stable light state.
|
Sensitivity adjustment
|
B1 increases the sensitivity and B2 decreases the sensitivity
|
Protection
circuit
|
Common
|
-
|
Mutual interference prevention function
|
Open collector
output (DC power)
|
▪Power reverse connection protection
▪Output short-circuit over-current protection
▪Output reverse connection protection
▪Output short-circuit alarm
|
Response
time
|
Relay output
(AC/DC power)
|
Max. 20 ㎳
|
Open collector
output (DC power)
|
Max. 1 ㎳
|
Insulation Resistance
|
More than 20 MΩ (500 V d.c. mega)
|
Dielectric strength
|
1,000 V a.c. (50/60 Hz for 1 minute)
|
Vibration resistance
|
▪10-55Hz, sweep : 1.5mm
▪X·Y·Z 2 in each direction for 2 hours
|
Shock resistance
|
▪500 m/s²
▪X·Y·Z each direction 3 times
|
Ambient illumination
|
▪Sunlight : max. 11,000 lx
▪Incandescent : max 3,000 lx
|
Ambient temperature range
|
▪operating temperature : -20 ~ +55 ℃
▪During storage : -40 ~ +70℃
(Without condensation or icing)
|
Ambient humidity
|
35 ~ 85 % RH (Without condensation or icing)
|
Protection
|
IP67 (IEC standard)
|
Weight
(Packing)
|
Relay output
(AC/DC power)
|
265g (440g)
|
150g (280g)
|
145g (260g)
|
Open collector
output(DC power)
|
255g (430g)
|
140g (270g)
|
140g (255g)
|
Texture
|
Case
|
PC
|
Display
|
PC
|
Lens
|
PMMA
|
Accessory
|
Common
|
Instructions manual, bracket, bolt (M3 X 12 ㎜)
|
Accessory
|
-
|
Mirror (HY-M5)
|
-
|
Connection method
|
Cable type
|
wiring
specification
|
Relay output
(AC/DC power)
|
Ø 6 mm, Through-beam type transmitter : 2-core, Through-beam type receiver
Mirror-reflection type receiver, Diffuse-reflective type receiver : 5-core, 2 m
|
Open collector
output (DC power)
|
Ø 6 mm, Through-beam type transmitter : 2-core, Through-beam type receiver,
Mirror-reflection type receiver, Diffuse-reflective type receiver : 5-core, 2 m
|
specifications
of the small-sized cable
|
▪AWG20 (0.18 mm, 21 strands)
▪Insulation outer diameter : 1.5 mm
|